Extech MN16A Digital Mini MultiMeter

Item #:

EXT-MN16A

Brand:

Extech

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us

Share this product:

Description

MN16A Digital Mini MultiMeter by Extech

Features

Large easy to read digital display
Thermocouple Type K function for surface and air temperature measurements up to 1400°F (760°C)
Measure AC and DC Voltage to 600V
DC Current function to 10A
Resistance tests with Continuity and Diode functions
Convenient mini size with tilt stand
Includes built-in tilt stand, 9V battery (MN15A), two AAA batteries (MN16A), Test leads, and general purpose Type K thermocouple probe
AC Current, Capacitance, Frequency and Duty Cycle measurements
Data Hold locks reading in the display

Specifications

General Specifications

Diode Test	Test current of 0.3mA typical, open circuit voltage 1.5V DC typical
Continuity Check	Audible signal will sound if the resistance is less than 150Ω (approx.), test current <0.3mA
Temperature Sensor	Requires type K thermocouple
Input Impedance	7.8MΩ
AC Response	Average responding
ACV Bandwidth	50Hz to 400Hz
Display	4,000 count liquid crystal
Overrange indication	"OL" is displayed
Auto Power Off	30 minutes (approximately)
Polarity	Automatic (no indication for positive); Minus (-) sign for negative
Measurement Rate	2 times per second, nominal
Low Battery Indication	Battery symbol is displayed if battery voltage drops below operating voltage
Battery	Two AAA batteries
Fuses	mA, µA ranges; 0.5A/250V ceramic fast blow A range; 10A/250V ceramic fast blow
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F (40°C)
Storage Humidity	<80%
Operating Altitude	7000ft. (2000meters) maximum
Weight	0.5lb (225g) (includes holster).
Size	5.31" x 2.67" x 1.7" (135 x 68 x 43mm)
Safety	This meter is intended for indoor use and protected, against the users, by double insulation per EN61010-1 and IEC61010-1 2nd Edition (2001) to CAT III 600V; Pollution Degree 2. The meter also meets UL 61010-1, Second Edition (2004), CAN/CSA C22.2 No. 61010-1, Second Edition (2004), and UL 61010B-2-031, First Edition (2003)
Approvals	CE, ETL

Electrical Specifications

Function	Range	Resolution	Accuracy
DC Voltage (V DC)	4V	0.001V	±(1.2% reading + 2 digits)
	40V	0.01V
	400V	0.1V
	600V	1V	±(1.5% reading + 2 digits)
AC Voltage (V AC) (50 / 60Hz)	400mV	0.1mV	±(1.5% reading + 15 digits)
	4V	0.001V	±(1.2% reading + 3 digits)
	40V	0.01V	±(1.5% reading + 3 digits)
	400V	0.1V	±(1.5% reading + 3 digits)
	600V	1V	±(2.0% reading + 4 digits)
	*400mV range is not autoranging
DC Current (A DC)	400μA	0.1μA	±(1.0% reading + 3 digits)
	4000μA	1μA	±(1.5% reading + 3 digits)
	40mA	0.01mA
	400mA	0.1mA
	10A	0.01A	±(2.5% reading + 5 digits)
AC Current (A AC)	400μA	0.1μA	±(1.5% reading + 5 digits)
	4000μA	1μA	±(1.8% reading + 5 digits)
	40mA	0.01mA
	400mA	0.1mA
	10A	0.01A	±(3.0% reading + 7 digits)
Resistance	400Ω	0.1Ω	±(1.2% reading + 4 digits)
	4kΩ	1Ω	±(1.0% reading + 2 digits)
	40kΩ	0.01kΩ	±(1.2% reading + 2 digits)
	400kΩ	0.1kΩ
	4MΩ	0.001MΩ
	40MΩ	0.01MΩ	±(2.0% reading + 3 digits)
Capacitance	40nF	0.01nF	±(5.0% reading + 30 digits)
	400nF	0.1nF	±(3.0% reading + 5 digits)
	4μF	0.001μF
	40μF	0.01μF
	100μF	0.1μF	±(5.0% reading + 5 digits)
Duty Cycle	0.1 to 99.9%	0.1%	±(1.2% reading + 2 digits)
Duty Cycle	pulse width range: 100µs - 100ms (Frequency: 5Hz to 150kHz)
Temp (type-K)	-4 to 1400°F	1°F	±(3.0% reading + 9°F/5°C) (probe accuracy not included)
Temp (type-K)	-20 to 750°C	1°C	±(3.0% reading + 9°F/5°C) (probe accuracy not included)
Frequency	5.000Hz	0.001Hz	±(1.5% reading + 5 digits)
	50.00Hz	0.01Hz	±(1.5% reading + 5 digits)
	500.0Hz	0.1Hz	±(1.2% reading + 3 digits)
	5.000kHz	0.001kHz
	50.00kHz	0.01kHz
	500.0kHz	0.1kHz
	5.000MHz	0.001MHz	±(1.5% reading + 4 digits)
	Sensitivity: >0.5V rms min. [ 1MHz; >3V rms > 1MHz