Extech PRT200 Non-Contact Phase Sequence Tester

Item #:

EXT-PRT200

Brand:

Extech

Our tech experts are ready to help!

Share this product:

PRT200 Non-Contact Phase Sequence Tester by Extech

75 to 1000VAC input voltage with 45 to 65Hz frequency range
LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement
Adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight
Fully insulated alligator clips with wide jaws
Low battery warning
CAT IV-600V safety rating
Dimensions: 4.7 x 2.7 x 1.5" (118 x 69 x 38mm); Weight: 13oz (370g)
Complete with three built-in 30" test leads with large color-coded alligator clips, four AA batteries, and pouch case

Measurement Principle	Static induction
Input Voltage	75 to 1000VAC
Frequency Range	45 to 65Hz
Max conductor diameter	33mm (1.3")
Probe length	86cm (34")
Auto-Off	5 min. without sequence detection
Low Battery Warning	Power LED flashes
Batteries	4 x 1.5V AA
Current consumption	15mA
Operating Temperature & Humidity	-10°C to 50°C (14°F to 122°F) Max. 80% R.H.
Storage temperature & Humidity	-20°C to 60° (-4°F to 140°F) Max. 80% R.H.
Safety	This meter is intended for origin of installation use and protected, against the users, by double insulation per EN61010-1 to Category IV 600V and Category III 1000V; Pollution Degree 2.
Approvals	CE