Chlorine/Fluoride Meters

CL200 ExStik® Chlorine Meter by Extech

Features

• Direct reading of Total Chlorine provides fast and easy measurements (less than 2 minutes)
• Low detection limit down to 0.01ppm
• Wide dynamic range of measurement up to 10ppm (use dilution method for 10 to 50ppm)
• Unaffected by sample color or turbidity
• Automatic electronic calibration
• Memory stores, tags and recalls up to 15 readings
• Unique flat surface chlorine electrode
• Waterproof to IP67 standard
• The state of the art LCD simultaneously displays ppm of Total Chlorine and Temperature plus analog bargraph indicator
• Complete with meter and flat surface Chlorine electrode, ExTab® reagent tablets (50 tests), protective sensor cap, sample cup with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap

FL700 Waterproof ExStik Fluoride Meter by Extech

Features

• First Fluoride meter with built-in Automatic Temperature Compensation
• Fastest response Fluoride meter (<1min)
• Easy use for Field or Laboratory fluoride testing
• Small sample/TISAB volume required for testing (10mL)
• In compliance with EPA Method 340.2.( Potentiometric Ion Selective Electrode)
• Automatic electronic 1 or 2 point calibration with offset adjustment
• Memory stores 25 labeled readings
• Waterproof to IP57
• Large LCD simultaneously displays ppm of Fluoride, Temperature, and analog bargraph indicator
• Complete with electrode, TISAB reagent tablets, sensor cap, four 3V button batteries, and 48" (1.2m) neckstrap

Applications

• Public Water Fluoridation Control - Fluoride is known to help prevent tooth decay while too much fluoride is known to be bad for the teeth
• The concentration recommended by the American Dental Association is 0.7-1.2 ppm.
• The MCL established by the EPA is 4.0 ppm
• Fluoride is naturally occurring and in some areas in the US the natural level exceeds 4.0 ppm

EX800 ExStik® 3-in-1 Chlorine, pH, Temperature Kit by Extech

Features

• 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph (pH bargraph originates at neutral point 7.00pH)
• Automatic electronic self calibration for Chlorine and ORP; 1, 2 or 3 point buffer calibration for pH
• Data Hold, Auto shut-off and low battery indication
• Waterproof design floats in wet environment (IP57)
• Direct reading of Total Chlorine from low detection limit; Unaffected by sample color or turbidity
• Simultaneous display of ppm or pH and °C/°F Temperature
• Smart chip predicts pH electrode performance with "RENEW" indicator when replacement is needed
• "CAL" indicator alerts user to recalibrate pH electrode
• Automatic Temperature Compensation
• EX900 Kit Complete with ExStik® Chlorine meter, gel filled pH electrode, ORP electrode, protective sensor cap, 5 packs of 10 reagent tablets (50 tests), 4 plastic sample cups, weighted stand, pH 4, 7 & 10buffer packs, four 3V SR44W batteries, carrying case, and neckstrap
• EX900-R Kit is same as EX900 but includes a refillable pH electrode
• EX800 Kit is same as EX900 but excludes ORP electrode

EX900 ExStik® 4-in-1 Chlorine, pH, ORP and Temperature Kit by Extech

Features

• 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph (pH bargraph originates at neutral point 7.00pH)
• Automatic electronic self calibration for Chlorine and ORP; 1, 2 or 3 point buffer calibration for pH
• Data Hold, Auto shut-off and low battery indication
• Waterproof design floats in wet environment (IP57)
• Direct reading of Total Chlorine from low detection limit; Unaffected by sample color or turbidity
• Simultaneous display of ppm or pH and °C/°F Temperature
• Smart chip predicts pH electrode performance with "RENEW" indicator when replacement is needed
• "CAL" indicator alerts user to recalibrate pH electrode
• Automatic Temperature Compensation
• EX900 Kit Complete with ExStik® Chlorine meter, gel filled pH electrode, ORP electrode, protective sensor cap, 5 packs of 10 reagent tablets (50 tests), 4 plastic sample cups, weighted stand, pH 4, 7 & 10buffer packs, four 3V SR44W batteries, carrying case, and neckstrap
• EX900-R Kit is same as EX900 but includes a refillable pH electrode
• EX800 Kit is same as EX900 but excludes ORP electrode