Conductivity/TDS/Salinity Meters

EC100 Conductivity/Temperature Meter by Extech

Features

• Units of measure include μS/cm, mS/cm, ppm, ppt, °F, and °C
• Large 3-1/2 digit (2000 count) LCD display
• Data Hold and low battery indication
• Auto Power off with disable
• Adjustable Automatic Temperature Compensation
• Waterproof design to withstand wet environment - meets IP65 standard
• Includes meter, protective sensor cap, and four LR44 button batteries. Order Conductivity standards separately (required for calibration)
• Measures Conductivity and Temperature with simultaneous readout display
• Two ranges for Conductivity with one point calibration per range

EC150 Conductivity/TDS/Temperature Meter by Extech

Features

• Units of measure include μS/cm, mS/cm, ppm, ppt, °F, and °C
• Large 3-1/2 digit (2000 count) LCD display
• Data Hold and low battery indication
• Auto Power off with disable
• Adjustable Automatic Temperature Compensation
• Waterproof design to withstand wet environment - meets IP65 standard
• Includes meter, protective sensor cap, and four LR44 button batteries. Order Conductivity standards separately (required for calibration)
• Measures Conductivity, TDS and Temperature
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value
• Simultaneous display of Conductivity or TDS, plus Temperature
• Two ranges for Conductivity and TDS with one point calibration per range

EC400 ExStik® Conductivity/TDS/Salinity Meter by Extech

Features

• Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution requiring a conductivity, TDS or Salinity measurements
• Units of measure include μS/cm, mS/cm, ppm, ppt, mg/L, and g/L
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value
• Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
• Data Hold, Auto Power Off and low battery indication
• Automatic Temperature Compensation of 2% per °C
• Simultaneous display of Conductivity, TDS, or Salinity plus Temperature
• Internal memory stores up to 25 labeled readings for easy recall
• Self calibration of electronics on power up
• Easy to replace Conductivity cell module
• Waterproof design to withstand wet environment – meets IP57 standard
• EC400 includes meter and Conductivity cell*, protective sensor cap, sample cup with cap, four CR2032 button batteries, and 48"(1.2m) neckstrap. Order Conductivity standards separately
• Optional EC410 kit includes EC400 ExStik® II Conductivity/TDS/Salinity/Temperature Meter, with sensor, protective cap, 84μS/cm, 1413μS/cm and 12880μS/cm calibration standards (30mL bottle each), weighted base, 3 sample plastic cups with caps, four 3V CR-2032 button batteries, 48" (1.2m) neckstrap, and carrying case

EC410 ExStik® Conductivity/TDS/Salinity Kit by Extech

Features

• Autoranging meter offers 3 ranges with 8 units of measure including μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °F, and °C
• Simultaneous display of Conductivity or TDS plus Temperature and bargraph
• Memory stores up to 15 labeled readings
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0
• Self calibration on power up
• Waterproof to IP57
• Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
• Data Hold, Auto Power Off and low battery indication
• Automatic Temperature Compensation of 2% per °C
• Auto standard recognition for calibration (84μS/cm, 1413μS/cm, and 12880μS/cm)
• Easy to replace Conductivity cell module
• Plastic sample cup and iron cast weighted base allows for hands-free operation while holding up the meter during measurement stage
• EC410 kit includes EC400 ExStik® Conductivity/TDS/ Salinity Temperature Meter, with sensor, protective cap, 84μS/cm, 1413μS/cm and 12880μS/cm calibration standards (30mL bottle each), weighted base, 3 sample plastic cups with caps, four 3V CR-2032 batteries, 48" (1.2m) neckstrap, and carrying case

EC600 Waterproof Conductivity Kit by Extech

Features

• Waterproof housing (meets IP57)
• Automatic one button pH calibration (4, 7, and 10pH)
• Choice of 3 point pH calibration for better accuracy
• One point Conductivity calibration - automatically recognizes 8 calibration solutions from USA, Europe and China series
• Automatic Temperature Compensation (non-linear compensation for purified water <10μS/cm to improve measuring accuracy)
• Memory stores up to 300 readings with series number, measured value and temperature
• Large blue backlit dual LCD display
• Auto power off saves battery life with disable function
• Complete with pH/mV/Temperature electrode, polymer Conductivity cell, pH calbration solutions (4, 7, and 10pH), Conductivity calibration solution (1413μS), 2 AA batteries, and hard carrying case

341350A-P Oyster™ Series pH/Conductivity/TDS/ORP/Salinity Meter by Extech

Features

• Large LCD built into adjustable "flip-up" cover displays measurement and Temperature simultaneously
• Microprocessor based with splash proof housing and front panel tactile touch pad to slope and calibrate
• Rugged design for handheld or benchtop use; neckstrap for "hands-free" operation
• Memory function stores and recalls 25 labeled readings
• Low Battery indicator and Auto Shut off after 10 minutes of non-use
• Automatic Temperature Compensation for Conductivity/TDS via thermistor built into conductivity cell
• Manual Temperature Compensation for pH (0 to 100°C)
• Thermistor probe measures from 32 to 194°F (0 to 90.0°C)
• Complete with mini pH electrode, sample buffers, polymer conductivity cell for TDS/Conductivity/Salinity, Thermistor probe, 9V battery, neckstrap and carrying case

341350A-P Oyster™ Series pH/Conductivity/TDS/ORP/Salinity Meter with NIST by Extech

Features

• Large LCD built into adjustable "flip-up" cover displays measurement and Temperature simultaneously
• Microprocessor based with splash proof housing and front panel tactile touch pad to slope and calibrate
• Rugged design for handheld or benchtop use; neckstrap for "hands-free" operation
• Memory function stores and recalls 25 labeled readings
• Low Battery indicator and Auto Shut off after 10 minutes of non-use
• Automatic Temperature Compensation for Conductivity/TDS via thermistor built into conductivity cell
• Manual Temperature Compensation for pH (0 to 100°C)
• Thermistor probe measures from 32 to 194°F (0 to 90.0°C)
• Complete with mini pH electrode, sample buffers, polymer conductivity cell for TDS/Conductivity/Salinity, Thermistor probe, 9V battery, neckstrap and carrying case

DO610 ExStik® II DO/pH/Conductivity Kit by Extech

Features

• Convenient DO/pH/Conductivity Kit with all the accessories and carrying case for easy travel
• Designed for water, wastewater, groundwater, aquaculture and fisheries professionals

Kit Includes

• EC500 pH/Conductivity ExStik® II meter with combination high accuracy multi-ranging Conductivity sensor for Conductivity, TDS, Salinity, pH and Temperature measurements
• DO600 Dissolved Oxygen ExStik® II meter with electrode, replacement membrane cap, and electrolyte
• Meters waterproof to IP57 standard

Accessories Includes

• Sample pH buffers - Single use pouches for pH4, pH7, pH10, and rinse solutions
• Weighted base with 2 cups and caps, four 3V CR-2032 batteries and neckstrap with each meter, and carrying case

EC500 Waterproof ExStik® II pH/Conductivity Meter by Extech

Features

• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
• Analog bargraph indicates trends
• Memory stores up to 25 labeled readings
• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
• RENEW feature alerts user when electrode needs replacement
• Auto power off and low battery indicator
• Waterproof to IP57
• EC500 meter includes electrode, protective sensor cap, sample cup with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap. Order Conductivity standards and pH buffers separately
• EC510 Kit includes EC500, 84μS/cm, 1413μS/cm, 12880μS/cm Conductivity calibration standards, pH buffer pouches (1 each of 4, 7, 10pH plus rinse solution), weighted base, 3 sample cups with caps, and case

EC510 Waterproof ExStik® II pH/Conductivity Meter Kit by Extech

Features

• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
• Analog bargraph indicates trends
• Memory stores up to 25 labeled readings
• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
• RENEW feature alerts user when electrode needs replacement
• Auto power off and low battery indicator
• Waterproof to IP57
• EC500 meter includes electrode, protective sensor cap, sample cup with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap. Order Conductivity standards and pH buffers separately
• EC510 Kit includes EC500, 84μS/cm, 1413μS/cm, 12880μS/cm Conductivity calibration standards, pH buffer pouches (1 each of 4, 7, 10pH plus rinse solution), weighted base, 3 sample cups with caps, and case