1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. Honeywell Analytics
  3. Sensepoint with Junction Box
  4. Sensepoint with Junction Box

Sensepoint with Junction Box

Results: 1-16 of 16
Filter by Category
Items per page:
Sort by:
  1. Honeywell Analytics Sensepoint Detector with Junction Box, 0-100%LEL Methane - SPSTAXF1QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-100%LEL Methane - SPSTAXF1

    Brand: Honeywell Analytics | Item #: SPSTAXF1

    $480.00
  2. Honeywell Analytics Sensepoint Detector with Junction Box, 0-25%v/v Oxygen - SPSTAXO1QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-25%v/v Oxygen - SPSTAXO1

    Brand: Honeywell Analytics | Item #: SPSTAXO1

    $695.00
  3. Honeywell Analytics Sensepoint Detector with Junction Box, 0-200ppm Carbon Monoxide - SPSTAXC1QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-200ppm Carbon Monoxide - SPSTAXC1

    Brand: Honeywell Analytics | Item #: SPSTAXC1

    $749.00
  4. Honeywell Analytics Sensepoint Detector with Junction Box, 0-500ppm Carbon Monoxide - SPSTAXC2QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-500ppm Carbon Monoxide - SPSTAXC2

    Brand: Honeywell Analytics | Item #: SPSTAXC2

    $875.00
  5. Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Hydrogen Sulphide - SPSTAXH1QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Hydrogen Sulphide - SPSTAXH1

    Brand: Honeywell Analytics | Item #: SPSTAXH1

    $666.00
  6. Honeywell Analytics Sensepoint Detector with Junction Box, 0-20ppm Hydrogen Sulphide - SPSTAXH2QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-20ppm Hydrogen Sulphide - SPSTAXH2

    Brand: Honeywell Analytics | Item #: SPSTAXH2

    $824.00
  7. Honeywell Analytics Sensepoint Detector with Junction Box, 0-100ppm Hydrogen Sulphide - SPSTAXH3QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-100ppm Hydrogen Sulphide - SPSTAXH3

    Brand: Honeywell Analytics | Item #: SPSTAXH3

    $802.00
  8. Honeywell Analytics Sensepoint Detector with Junction Box, 0-1,000ppm Hydrogen - SPSTAXG1QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-1,000ppm Hydrogen - SPSTAXG1

    Brand: Honeywell Analytics | Item #: SPSTAXG1

    $925.00
  9. Honeywell Analytics Sensepoint Detector with Junction Box, 0-10,000ppm Hydrogen - SPSTAXG2QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-10,000ppm Hydrogen - SPSTAXG2

    Brand: Honeywell Analytics | Item #: SPSTAXG2

    $1,032.00
  10. Honeywell Analytics Sensepoint Detector with Junction Box, 0-5ppm Chlorine - SPSTAXL1QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-5ppm Chlorine - SPSTAXL1

    Brand: Honeywell Analytics | Item #: SPSTAXL1

    $925.00
  11. Honeywell Analytics Sensepoint Detector with Junction Box, 0-15ppm Chlorine - SPSTAXL2QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-15ppm Chlorine - SPSTAXL2

    Brand: Honeywell Analytics | Item #: SPSTAXL2

    $1,032.00
  12. Honeywell Analytics Sensepoint Detector with Junction Box, 0-15ppm Sulphur Dioxide - SPSTAXS1QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-15ppm Sulphur Dioxide - SPSTAXS1

    Brand: Honeywell Analytics | Item #: SPSTAXS1

    $989.00
  13. Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Sulphur Dioxide - SPSTAXS2QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Sulphur Dioxide - SPSTAXS2

    Brand: Honeywell Analytics | Item #: SPSTAXS2

    $1,032.00
  14. Honeywell Analytics Sensepoint Detector with Junction Box, 0-10ppm Nitrogen Dioxide - SPSTAXN1QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-10ppm Nitrogen Dioxide - SPSTAXN1

    Brand: Honeywell Analytics | Item #: SPSTAXN1

    $1,034.00
  15. Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Ammonia - SPSTAXA1QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Ammonia - SPSTAXA1

    Brand: Honeywell Analytics | Item #: SPSTAXA1

    $975.00
  16. Honeywell Analytics Sensepoint Detector with Junction Box, 0-1000ppm Ammonia - SPSTAXA2QUICK VIEW

    Honeywell Analytics Sensepoint Detector with Junction Box, 0-1000ppm Ammonia - SPSTAXA2

    Brand: Honeywell Analytics | Item #: SPSTAXA2

    $981.00
Honeywell Analytics Sensepoint Detector with Junction Box, 0-100%LEL Methane - SPSTAXF1
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-100%LEL Methane - SPSTAXF1




Item #SPSTAXF1
BrandHoneywell Analytics
Price: $480.00
Quantity:

SPSTAXF1 Sensepoint Detector with Junction Box, 0-100%LEL Methane by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-25%v/v Oxygen - SPSTAXO1
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-25%v/v Oxygen - SPSTAXO1




Item #SPSTAXO1
BrandHoneywell Analytics
Price: $695.00
Quantity:

SPSTAXO1 Sensepoint Detector with Junction Box, 0-25%v/v Oxygen by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-200ppm Carbon Monoxide - SPSTAXC1
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-200ppm Carbon Monoxide - SPSTAXC1




Item #SPSTAXC1
BrandHoneywell Analytics
Price: $749.00
Quantity:

SPSTAXC1 Sensepoint Detector with Junction Box, 0-200ppm Carbon Monoxide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-500ppm Carbon Monoxide - SPSTAXC2
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-500ppm Carbon Monoxide - SPSTAXC2




Item #SPSTAXC2
BrandHoneywell Analytics
Price: $875.00
Quantity:

SPSTAXC2 Sensepoint Detector with Junction Box, 0-500ppm Carbon Monoxide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Hydrogen Sulphide - SPSTAXH1
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Hydrogen Sulphide - SPSTAXH1




Item #SPSTAXH1
BrandHoneywell Analytics
Price: $666.00
Quantity:

SPSTAXH1 Sensepoint Detector with Junction Box, 0-50ppm Hydrogen Sulphide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-20ppm Hydrogen Sulphide - SPSTAXH2
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-20ppm Hydrogen Sulphide - SPSTAXH2




Item #SPSTAXH2
BrandHoneywell Analytics
Price: $824.00
Quantity:

SPSTAXH2 Sensepoint Detector with Junction Box, 0-20ppm Hydrogen Sulphide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-100ppm Hydrogen Sulphide - SPSTAXH3
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-100ppm Hydrogen Sulphide - SPSTAXH3




Item #SPSTAXH3
BrandHoneywell Analytics
Price: $802.00
Quantity:

SPSTAXH3 Sensepoint Detector with Junction Box, 0-100ppm Hydrogen Sulphide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-1,000ppm Hydrogen - SPSTAXG1
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-1,000ppm Hydrogen - SPSTAXG1




Item #SPSTAXG1
BrandHoneywell Analytics
Price: $925.00
Quantity:

SPSTAXG1 Sensepoint Detector with Junction Box, 0-1,000ppm Hydrogen by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-10,000ppm Hydrogen - SPSTAXG2
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-10,000ppm Hydrogen - SPSTAXG2




Item #SPSTAXG2
BrandHoneywell Analytics
Price: $1,032.00
Quantity:

SPSTAXG2 Sensepoint Detector with Junction Box, 0-10,000ppm Hydrogen by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-5ppm Chlorine - SPSTAXL1
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-5ppm Chlorine - SPSTAXL1




Item #SPSTAXL1
BrandHoneywell Analytics
Price: $925.00
Quantity:

SPSTAXL1 Sensepoint Detector with Junction Box, 0-5ppm Chlorine by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-15ppm Chlorine - SPSTAXL2
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-15ppm Chlorine - SPSTAXL2




Item #SPSTAXL2
BrandHoneywell Analytics
Price: $1,032.00
Quantity:

SPSTAXL2 Sensepoint Detector with Junction Box, 0-15ppm Chlorine by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-15ppm Sulphur Dioxide - SPSTAXS1
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-15ppm Sulphur Dioxide - SPSTAXS1




Item #SPSTAXS1
BrandHoneywell Analytics
Price: $989.00
Quantity:

SPSTAXS1 Sensepoint Detector with Junction Box, 0-15ppm Sulphur Dioxide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Sulphur Dioxide - SPSTAXS2
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Sulphur Dioxide - SPSTAXS2




Item #SPSTAXS2
BrandHoneywell Analytics
Price: $1,032.00
Quantity:

SPSTAXS2 Sensepoint Detector with Junction Box, 0-50ppm Sulphur Dioxide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-10ppm Nitrogen Dioxide - SPSTAXN1
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-10ppm Nitrogen Dioxide - SPSTAXN1




Item #SPSTAXN1
BrandHoneywell Analytics
Price: $1,034.00
Quantity:

SPSTAXN1 Sensepoint Detector with Junction Box, 0-10ppm Nitrogen Dioxide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Ammonia - SPSTAXA1
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-50ppm Ammonia - SPSTAXA1




Item #SPSTAXA1
BrandHoneywell Analytics
Price: $975.00
Quantity:

SPSTAXA1 Sensepoint Detector with Junction Box, 0-50ppm Ammonia by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Honeywell Analytics Sensepoint Detector with Junction Box, 0-1000ppm Ammonia - SPSTAXA2
View Product Details >

Honeywell Analytics Sensepoint Detector with Junction Box, 0-1000ppm Ammonia - SPSTAXA2




Item #SPSTAXA2
BrandHoneywell Analytics
Price: $981.00
Quantity:

SPSTAXA2 Sensepoint Detector with Junction Box, 0-1000ppm Ammonia by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

  • Flammable, toxic and Oxygen versions available
  • Suitable for indoor or outdoor use
  • IP65 as standard

Proven Sensor Technology

  • Surecell™ electrochemical sensors
  • Poison resistant catalytic bead
  • Fast and reliable
  • Typical 2 to 5 years operational life

ATEX Certified

  • Complies with the latest European standards
  • Hazardous area and performance approvals
  • Can be used for uncertified applications

Easy to Use

  • Factory set operation
  • Simple sensor replacement
  • Minimal training required

Friendly Installation

  • Universal junction box
  • One box, three entries
  • Metric and NPT compatibility
  • Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

  • Weather Housing (IP66)
  • Flow adaptor
  • Collecting cone
Results: 1-16 of 16
Items per page:
Sort by:
JJS Technical Services
JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173

1-866-4 JJSTECH (1-866-455-7832) sales@jjstech.com

Company
Orders
More
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
Ask an Expert

1-866-4 JJSTECH(1-866-455-7832)

Email Us
  • HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  • Authorize.Net Merchant - Click to Verify

Copyright ©2000-2023. JJS Technical Services. Logos and Trademarks are the property of their respective owners. All Rights Reserved.