1-866-4 JJSTECH (1-866-455-7832)
1-866-4 JJSTECH (1-866-455-7832)
SE International Personal Alarming Dosimeter and Rate Meter
SE International Personal Alarming Dosimeter and Rate MeterSE International Personal Alarming Dosimeter and Rate Meter

SE International Personal Alarming Dosimeter and Rate Meter

Item #
SE International



    Personal Alarming Dosimeter and Rate Meter by SE International

    The RADOS RAD-60 Personal Alarm Dosimeter is a precise and reliable instrument for ensuring the personal safety of the user. Ideally, the RAD-60 is used in everyday radiation monitoring, in stand-alone conditions. If your needs grow for a more sophisticated system, the versatile RAD-60 can also be integrated into an Access Control System. The RAD-60 can be switched into System Mode, for the purpose of tracking Personnel Dose records and generating compliance reports.

    The design includes state-of-the-art technology with built in memory for retrieving dose, even during power-down. It eliminates outside interference from shock and RF. The RAD-60 is easily programmed by the user, has a digital display, and operates with a single AAA alkaline battery.

    With the push of a button, you can turn the unit on/off, change the digital display to read dose or dose rate, select from several dose and dose rate alarm levels, turn the chirp functionon/off, reset the integrated dose, and perform battery tests. The large digital display gives instant dose or dose rate readings and the audible alarm is loud (>85dba)

    The Access Control System is a combination of the following two accessories:

    ADR-1 Configuration Kit

    - Connects to any PC with a serial port using Windows 95 or greater
    - Allows the User to Change Dosimeter Settings
    - Allows the User to Perform Calibration (with applicable source)
    - Allows User to Assign a User ID and Name

    The ACS Express Software

    ACS Express is a state-of-the-art Windows-based Access Control System providing logging and personnel control for restricted area entries and exits. Designed exclusively for use by Emergency Responders. Load the software on a laptop, hook up an ADR-1 Reader and your ready to implement the system in minutes. Provides dose records and ingress/egress controls to track personnel in radiation areas.

    Detector Energy compensated Si-Diode
    Button Functions Front panel button has the following functions:
    change display priority (dose/dose rate)
    switch ON/OFF
    chirp ON/OFF
    reset integrated dose
    change alarm thresholds
    activate battery test
    Measurement Range Dose: 1 uSv - 9.99 Sv or 0.1 mrem - 999 rem
    Energy Response Hp(10), 60 keV - 3 MeV, better than + or - 25%, up to 6 MeV, better than + or - 35%
    Dose Rate 5 uSv/h - 3 Sv/h or 0.5 mrem/h - 300 rem/h
    Dose Rate Linearity Better than + or - 15% up to 3 Sv/h (300 rem/h)
    Calibration Better than + or -5% (Cs-137, 662 keV at 2 mSv/h), Hp(10)
    Audible Alarms Seven separate alarms, sound level typically better than 85 dBA at 30 cm
    integrated dose
    dose rate
    dose overflow
    dose rate overflow at 3 Sv/h or 300 rem/h
    low battery 1 and 2
    Alarm Thresholds Six preset values each for integrated dose and dose rate-push button selection
    Connectors Infrared communication via bottom of the dosimeter
    Power Requirements One triple A alkaline cell, typical life is 1800 hours in background (dose mode)
    Temperature Range -20 - + 50° C operational, humidity up to 90% RH, non-condensed -20 - + 70° C storing
    Weight 80 g (including battery)
    Size 78 x 67 x 22 mm

    There are no questions or answers for this item.