1-866-4 JJSTECH(1-866-455-7832)

SE International Personal Alarming Dosimeter and Rate Meter (Set in SI units)

Item #:
RADOS-RAD60S
Brand:
SE International
$790.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
SE International Personal Alarming Dosimeter and Rate Meter (Set in SI units)

SE International Personal Alarming Dosimeter and Rate Meter (Set in SI units)

$790.00

Personal Alarming Dosimeter and Rate Meter (Set in SI units) by SE International

The RADOS RAD-60 Personal Alarm Dosimeter is a precise and reliable instrument for ensuring the personal safety of the user. Ideally, the RAD-60 is used in everyday radiation monitoring, in stand-alone conditions. If your needs grow for a more sophisticated system, the versatile RAD-60 can also be integrated into an Access Control System. The RAD-60 can be switched into System Mode, for the purpose of tracking Personnel Dose records and generating compliance reports.

The design includes state-of-the-art technology with built in memory for retrieving dose, even during power-down. It eliminates outside interference from shock and RF. The RAD-60 is easily programmed by the user, has a digital display, and operates with a single AAA alkaline battery.

With the push of a button, you can turn the unit on/off, change the digital display to read dose or dose rate, select from several dose and dose rate alarm levels, turn the chirp functionon/off, reset the integrated dose, and perform battery tests. The large digital display gives instant dose or dose rate readings and the audible alarm is loud (>85dba)

The Access Control System is a combination of the following two accessories:

ADR-1 Configuration Kit


- Connects to any PC with a serial port using Windows 95 or greater
- Allows the User to Change Dosimeter Settings
- Allows the User to Perform Calibration (with applicable source)
- Allows User to Assign a User ID and Name

The ACS Express Software


ACS Express is a state-of-the-art Windows-based Access Control System providing logging and personnel control for restricted area entries and exits. Designed exclusively for use by Emergency Responders. Load the software on a laptop, hook up an ADR-1 Reader and your ready to implement the system in minutes. Provides dose records and ingress/egress controls to track personnel in radiation areas.
Detector Energy compensated Si-Diode
Button Functions Front panel button has the following functions:
change display priority (dose/dose rate)
switch ON/OFF
chirp ON/OFF
reset integrated dose
change alarm thresholds
activate battery test
Measurement Range Dose: 1 uSv - 9.99 Sv or 0.1 mrem - 999 rem
Energy Response Hp(10), 60 keV - 3 MeV, better than + or - 25%, up to 6 MeV, better than + or - 35%
Dose Rate 5 uSv/h - 3 Sv/h or 0.5 mrem/h - 300 rem/h
Dose Rate Linearity Better than + or - 15% up to 3 Sv/h (300 rem/h)
Calibration Better than + or -5% (Cs-137, 662 keV at 2 mSv/h), Hp(10)
Audible Alarms Seven separate alarms, sound level typically better than 85 dBA at 30 cm
integrated dose
dose rate
dose overflow
dose rate overflow at 3 Sv/h or 300 rem/h
low battery 1 and 2
defect
Alarm Thresholds Six preset values each for integrated dose and dose rate-push button selection
Connectors Infrared communication via bottom of the dosimeter
Power Requirements One triple A alkaline cell, typical life is 1800 hours in background (dose mode)
Temperature Range -20 - + 50° C operational, humidity up to 90% RH, non-condensed -20 - + 70° C storing
Weight 80 g (including battery)
Size 78 x 67 x 22 mm

Datasheets & User Manuals

Questions & Answers