1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. RKI Instruments
  3. M2A Series
  4. M2A Series Stand Alone Transmitter
  5. Remote Mount M2A with Calibration Adaptor / Splash Guard

Remote Mount M2A with Calibration Adaptor / Splash Guard

Results: 1-20 of 20
Filter by Category
Items per page:
Sort by:
  1. RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter, UL Version - 65-2640RK-03QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter, UL Version - 65-2640RK-03

    Brand: RKI Instruments | Item #: 65-2640RK-03

    $1,512.00
  2. RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, UL Version - 65-2640RK-04QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, UL Version - 65-2640RK-04

    Brand: RKI Instruments | Item #: 65-2640RK-04

    $1,528.00
  3. RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, 0-100% LEL, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version - 65-2640RK-05-04QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, 0-100% LEL, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version - 65-2640RK-05-04

    Brand: RKI Instruments | Item #: 65-2640RK-05-04

    $1,607.00
  4. RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen (H2) Specific LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, UL Version - 65-2641RK-04QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen (H2) Specific LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, UL Version - 65-2641RK-04

    Brand: RKI Instruments | Item #: 65-2641RK-04

    $1,691.00
  5. RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen Sulfide (H2S) 0-100 ppm, Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version - 65-2645RK-05-04QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen Sulfide (H2S) 0-100 ppm, Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version - 65-2645RK-05-04

    Brand: RKI Instruments | Item #: 65-2645RK-05-04

    $1,701.00
  6. RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2649RK-CH4-4QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2649RK-CH4-4

    Brand: RKI Instruments | Item #: 65-2649RK-CH4-4

    $1,911.00
  7. RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Hydrocarbons (isobutane) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2649RK-HC-04QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Hydrocarbons (isobutane) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2649RK-HC-04

    Brand: RKI Instruments | Item #: 65-2649RK-HC-04

    $1,911.00
  8. RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) Vol 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2658RK-CH4-4QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) Vol 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2658RK-CH4-4

    Brand: RKI Instruments | Item #: 65-2658RK-CH4-4

    $1,911.00
  9. RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, IR LEL CH4, Remote Detector in SS J-box, Calibration Adapter / Splash Guard - 65-2649SS-CH4-4QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, IR LEL CH4, Remote Detector in SS J-box, Calibration Adapter / Splash Guard - 65-2649SS-CH4-4

    Brand: RKI Instruments | Item #: 65-2649SS-CH4-4

    $2,016.00
  10. RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, %LEL, hydrogen specific, with remote detector & calibration adapter, CSA version - 65-2641RK-05-04QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, %LEL, hydrogen specific, with remote detector & calibration adapter, CSA version - 65-2641RK-05-04

    Brand: RKI Instruments | Item #: 65-2641RK-05-04

    $1,701.00
  11. RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-25% Oxygen, with horn/strobe, remote detector, battery clamp power cable - 65-2643RK-ORQUICK VIEW

    RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-25% Oxygen, with horn/strobe, remote detector, battery clamp power cable - 65-2643RK-OR

    Brand: RKI Instruments | Item #: 65-2643RK-OR

    $1,932.00
  12. RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, XP, 0-25% oxygen, CSA version, capillary type, with remote detector/SS jobx & calibration adapter - 65-2643RK0504SSQUICK VIEW

    RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, XP, 0-25% oxygen, CSA version, capillary type, with remote detector/SS jobx & calibration adapter - 65-2643RK0504SS

    Brand: RKI Instruments | Item #: 65-2643RK0504SS

    $1,733.00
  13. RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-100 PPM H2S, with horn/strobe, remote detector, battery clamp power cable - 65-2645RK-HRQUICK VIEW

    RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-100 PPM H2S, with horn/strobe, remote detector, battery clamp power cable - 65-2645RK-HR

    Brand: RKI Instruments | Item #: 65-2645RK-HR

    $2,016.00
  14. RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-100ppm H2S, CSA ver, with remote detector/SS j-box & calibration adapter/splash guard - 65-2645RK0504SSQUICK VIEW

    RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-100ppm H2S, CSA ver, with remote detector/SS j-box & calibration adapter/splash guard - 65-2645RK0504SS

    Brand: RKI Instruments | Item #: 65-2645RK0504SS

    $1,796.00
  15. RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5000 ppm, with remote detector and calibration adapter/splash guard - 65-2660RK-02-04QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5000 ppm, with remote detector and calibration adapter/splash guard - 65-2660RK-02-04

    Brand: RKI Instruments | Item #: 65-2660RK-02-04

    $1,911.00
  16. RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5%, non explosion proof with replacement sensor, with remote detector/calibration adapter/splash guard - 65-2661RK-03-04QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5%, non explosion proof with replacement sensor, with remote detector/calibration adapter/splash guard - 65-2661RK-03-04

    Brand: RKI Instruments | Item #: 65-2661RK-03-04

    $1,806.00
  17. RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-25% oxygen, capillary type, non explosion proof, with remote detector & calibration adapter - 65-2666RK-04QUICK VIEW

    RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-25% oxygen, capillary type, non explosion proof, with remote detector & calibration adapter - 65-2666RK-04

    Brand: RKI Instruments | Item #: 65-2666RK-04

    $1,533.00
  18. RKI Instruments M2A CT-7 Style Sensor / Transmitter, Chlorine (Cl2) 0 - 10 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-CL2-104QUICK VIEW

    RKI Instruments M2A CT-7 Style Sensor / Transmitter, Chlorine (Cl2) 0 - 10 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-CL2-104

    Brand: RKI Instruments | Item #: 65-2670-CL2-104

    $1,827.00
  19. RKI Instruments M2A CT-7 Style Sensor / Transmitter, Chlorine Dioxide (ClO2) 0 - 3 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-CLO2-34QUICK VIEW

    RKI Instruments M2A CT-7 Style Sensor / Transmitter, Chlorine Dioxide (ClO2) 0 - 3 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-CLO2-34

    Brand: RKI Instruments | Item #: 65-2670-CLO2-34

    $1,827.00
  20. RKI Instruments M2A CT-7 Style Sensor / Transmitter, Ammonia (NH3) 0 - 500 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-NH3-5-4QUICK VIEW

    RKI Instruments M2A CT-7 Style Sensor / Transmitter, Ammonia (NH3) 0 - 500 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-NH3-5-4

    Brand: RKI Instruments | Item #: 65-2670-NH3-5-4

    $1,827.00
RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter, UL Version - 65-2640RK-03
View Product Details >

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter, UL Version - 65-2640RK-03




Item #65-2640RK-03
BrandRKI Instruments
Price: $1,512.00
Quantity:

65-2640RK-03 M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter, UL Version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, UL Version - 65-2640RK-04
View Product Details >

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, UL Version - 65-2640RK-04




Item #65-2640RK-04
BrandRKI Instruments
Price: $1,528.00
Quantity:

65-2640RK-04 M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, LEL 0-100%, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, UL Version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, 0-100% LEL, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version - 65-2640RK-05-04
View Product Details >

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, 0-100% LEL, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version - 65-2640RK-05-04




Item #65-2640RK-05-04
BrandRKI Instruments
Price: $1,607.00
Quantity:

65-2640RK-05-04 M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, 0-100% LEL, (specify calibration), Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen (H2) Specific LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, UL Version - 65-2641RK-04
View Product Details >

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen (H2) Specific LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, UL Version - 65-2641RK-04




Item #65-2641RK-04
BrandRKI Instruments
Price: $1,691.00
Quantity:

65-2641RK-04 M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen (H2) Specific LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, UL Version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen Sulfide (H2S) 0-100 ppm, Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version - 65-2645RK-05-04
View Product Details >

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen Sulfide (H2S) 0-100 ppm, Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version - 65-2645RK-05-04




Item #65-2645RK-05-04
BrandRKI Instruments
Price: $1,701.00
Quantity:

65-2645RK-05-04 M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, Hydrogen Sulfide (H2S) 0-100 ppm, Remote Detector and Calibration Adapter / Splash Guard, cCSAus Version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2649RK-CH4-4
View Product Details >

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2649RK-CH4-4




Item #65-2649RK-CH4-4
BrandRKI Instruments
Price: $1,911.00
Quantity:

65-2649RK-CH4-4 M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Hydrocarbons (isobutane) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2649RK-HC-04
View Product Details >

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Hydrocarbons (isobutane) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2649RK-HC-04




Item #65-2649RK-HC-04
BrandRKI Instruments
Price: $1,911.00
Quantity:

65-2649RK-HC-04 M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Hydrocarbons (isobutane) LEL 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) Vol 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2658RK-CH4-4
View Product Details >

RKI Instruments M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) Vol 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version - 65-2658RK-CH4-4




Item #65-2658RK-CH4-4
BrandRKI Instruments
Price: $1,911.00
Quantity:

65-2658RK-CH4-4 M2A Stand Alone Sensor (catalytic) / Transmitter with J-box, IR Methane (CH4) Vol 0-100%, Remote Detector and Calibration Adapter / Splash Guard, cULus Version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, IR LEL CH4, Remote Detector in SS J-box, Calibration Adapter / Splash Guard - 65-2649SS-CH4-4
View Product Details >

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, IR LEL CH4, Remote Detector in SS J-box, Calibration Adapter / Splash Guard - 65-2649SS-CH4-4




Item #65-2649SS-CH4-4
BrandRKI Instruments
Price: $2,016.00
Quantity:

65-2649SS-CH4-4 M2A Stand Alone Sensor / Transmitter with J-box, IR LEL CH4, Remote Detector in SS J-box, Calibration Adapter / Splash Guard by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, %LEL, hydrogen specific, with remote detector & calibration adapter, CSA version - 65-2641RK-05-04
View Product Details >

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, %LEL, hydrogen specific, with remote detector & calibration adapter, CSA version - 65-2641RK-05-04




Item #65-2641RK-05-04
BrandRKI Instruments
Price: $1,701.00
Quantity:

65-2641RK-05-04 M2A Stand Alone Sensor / Transmitter with J-box, %LEL, hydrogen specific, with remote detector & calibration adapter, CSA version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-25% Oxygen, with horn/strobe, remote detector, battery clamp power cable - 65-2643RK-OR
View Product Details >

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-25% Oxygen, with horn/strobe, remote detector, battery clamp power cable - 65-2643RK-OR




Item #65-2643RK-OR
BrandRKI Instruments
Price: $1,932.00
Quantity:

65-2643RK-OR M2A Stand Alone Sensor / Transmitter with J-box, 0-25% Oxygen, with horn/strobe, remote detector, battery clamp power cable by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, XP, 0-25% oxygen, CSA version, capillary type, with remote detector/SS jobx & calibration adapter - 65-2643RK0504SS
View Product Details >

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, XP, 0-25% oxygen, CSA version, capillary type, with remote detector/SS jobx & calibration adapter - 65-2643RK0504SS




Item #65-2643RK0504SS
BrandRKI Instruments
Price: $1,733.00
Quantity:

65-2643RK0504SS M2A Stand Alone Sensor / Transmitter with J-box, XP, 0-25% oxygen, CSA version, capillary type, with remote detector/SS jobx & calibration adapter by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-100 PPM H2S, with horn/strobe, remote detector, battery clamp power cable - 65-2645RK-HR
View Product Details >

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-100 PPM H2S, with horn/strobe, remote detector, battery clamp power cable - 65-2645RK-HR




Item #65-2645RK-HR
BrandRKI Instruments
Price: $2,016.00
Quantity:

65-2645RK-HR M2A Stand Alone Sensor / Transmitter with J-box, 0-100 PPM H2S, with horn/strobe, remote detector, battery clamp power cable by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-100ppm H2S, CSA ver, with remote detector/SS j-box & calibration adapter/splash guard - 65-2645RK0504SS
View Product Details >

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-100ppm H2S, CSA ver, with remote detector/SS j-box & calibration adapter/splash guard - 65-2645RK0504SS




Item #65-2645RK0504SS
BrandRKI Instruments
Price: $1,796.00
Quantity:

65-2645RK0504SS M2A Stand Alone Sensor / Transmitter with J-box, 0-100ppm H2S, CSA ver, with remote detector/SS j-box & calibration adapter/splash guard by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5000 ppm, with remote detector and calibration adapter/splash guard - 65-2660RK-02-04
View Product Details >

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5000 ppm, with remote detector and calibration adapter/splash guard - 65-2660RK-02-04




Item #65-2660RK-02-04
BrandRKI Instruments
Price: $1,911.00
Quantity:

65-2660RK-02-04 M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5000 ppm, with remote detector and calibration adapter/splash guard by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5%, non explosion proof with replacement sensor, with remote detector/calibration adapter/splash guard - 65-2661RK-03-04
View Product Details >

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5%, non explosion proof with replacement sensor, with remote detector/calibration adapter/splash guard - 65-2661RK-03-04




Item #65-2661RK-03-04
BrandRKI Instruments
Price: $1,806.00
Quantity:

65-2661RK-03-04 M2A Stand Alone Sensor / Transmitter with J-box, CO2, 0 - 5%, non explosion proof with replacement sensor, with remote detector/calibration adapter/splash guard by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-25% oxygen, capillary type, non explosion proof, with remote detector & calibration adapter - 65-2666RK-04
View Product Details >

RKI Instruments M2A Stand Alone Sensor / Transmitter with J-box, 0-25% oxygen, capillary type, non explosion proof, with remote detector & calibration adapter - 65-2666RK-04




Item #65-2666RK-04
BrandRKI Instruments
Price: $1,533.00
Quantity:

65-2666RK-04 M2A Stand Alone Sensor / Transmitter with J-box, 0-25% oxygen, capillary type, non explosion proof, with remote detector & calibration adapter by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A CT-7 Style Sensor / Transmitter, Chlorine (Cl2) 0 - 10 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-CL2-104
View Product Details >

RKI Instruments M2A CT-7 Style Sensor / Transmitter, Chlorine (Cl2) 0 - 10 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-CL2-104




Item #65-2670-CL2-104
BrandRKI Instruments
Price: $1,827.00
Quantity:

65-2670-CL2-104 M2A CT-7 Style Sensor / Transmitter, Chlorine (Cl2) 0 - 10 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A CT-7 Style Sensor / Transmitter, Chlorine Dioxide (ClO2) 0 - 3 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-CLO2-34
View Product Details >

RKI Instruments M2A CT-7 Style Sensor / Transmitter, Chlorine Dioxide (ClO2) 0 - 3 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-CLO2-34




Item #65-2670-CLO2-34
BrandRKI Instruments
Price: $1,827.00
Quantity:

65-2670-CLO2-34 M2A CT-7 Style Sensor / Transmitter, Chlorine Dioxide (ClO2) 0 - 3 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

RKI Instruments M2A CT-7 Style Sensor / Transmitter, Ammonia (NH3) 0 - 500 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-NH3-5-4
View Product Details >

RKI Instruments M2A CT-7 Style Sensor / Transmitter, Ammonia (NH3) 0 - 500 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard - 65-2670-NH3-5-4




Item #65-2670-NH3-5-4
BrandRKI Instruments
Price: $1,827.00
Quantity:

65-2670-NH3-5-4 M2A CT-7 Style Sensor / Transmitter, Ammonia (NH3) 0 - 500 ppm, non explosion proof with j-box, remote mount and calibration adapter/splash guard by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

  • Operates with or without a controller
  • Direct digital readout with OLED cold temperature display
  • Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
  • Infrared sensor for combustibles and CO2
  • 4-20 mA & digital Modbus outputs standard
  • 2 fully programmable alarm relays & fail relay
  • Non-intrusive calibration via magnetic wand
  • Explosion proof construction
  • Patented water repellent sensor cover
  • User friendly setup, push buttons & OLED menus
  • Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

Results: 1-20 of 20
Items per page:
Sort by:
JJS Technical Services
JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173

1-866-4 JJSTECH (1-866-455-7832) sales@jjstech.com

Company
Orders
More
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
Ask an Expert

1-866-4 JJSTECH(1-866-455-7832)

Email Us
  • HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  • Authorize.Net Merchant - Click to Verify

Copyright ©2000-2023. JJS Technical Services. Logos and Trademarks are the property of their respective owners. All Rights Reserved.