Extech MN35 Digital Mini MultiMeter

Item #:

EXT-MN35

Brand:

Extech

Our tech experts are ready to help!

Share this product:

MN35 Digital Mini MultiMeter by Extech

Large easy to read digital display
Measure AC and DC Voltage to 600V
DC Current function to 10A
Thermocouple Temperature measurements to 1400°F (750°C)
Resistance tests with Continuity and Diode functions
Manual ranging model (MN35) with 9V and 1.5V Battery test
Autoranging model (MN36) with AC Current, Capacitance and Frequency measurements
Convenient mini size with protective rubber holster and tilt stand
Data Hold locks reading in the display
Includes protective rubber holster, battery, Test leads and Type K thermocouple probe

General Specifications

Accuracy	Stated at 23°C ±5°C (73°F ±10°F) and less than 70% RH
Diode Test	Test current of 1mA maximum, open circuit voltage 2.8V DC typical
Continuity Check	Audible signal will sound if the resistance is less than approximately <40Ω ±5Ω
Temperature sensor	Requires type K thermocouple
Input Impedance	10MΩ (VDC) and 4.5MΩ (VAC)
Display	1999 count LCD
Overrange	"1 or ‐1" is displayed
Polarity	Automatic (no indication for positive polarity); Minus (‐) sign for negative polarity.
Measurement Rate	3 times per second, nominal
Low Battery	Battery symbol is displayed if battery voltage drops below operating voltage
Batteries	Requires one 9V battery (NEDA 1604 or equivalent)
Fuses	mA range; 250mA/250V fast blow 10A range, no protection
Operating Temp	0°C to 40°C (32°F to 104°F)
Storage Temp	‐20°C to 60°C (‐4°F to 140°F)
Relative Humidity	Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C.
Operating Altitude	2000 meters (7000ft) maximum.
Weight	153g (5.4 oz.)
Size	138mm x 72mm x 38mm (5.43" x 2.83" x 1.5")
Safety	For indoor use and in accordance with Overvoltage Category II, Pollution Degree 2. Category II includes local level, appliance, portable equipment, etc., with transient overvoltages less than Overvoltage Category III.

Electrical Specifications

Function	Range	Accuracy
DC Voltage (V DC)	200.0mV	±(0.5% reading + 2 digits)
	2.000V
	20.00V
	200.0V
	600V	±(0.8% reading + 2 digits)
AC Voltage (V AC) (40 ‐ 400Hz)	200.0V	±(1.2% reading + 10 digits)
AC Voltage (V AC) (40 ‐ 400Hz)	600V	±(1.2% reading + 10 digits)
DC Current (A DC)	200.0mA	±(1.5% reading + 2 digits)
DC Current (A DC)	10.00A	±(3.0% reading + 5 digits)
Resistance	200.0Ω	±(0.8% reading + 4 digits)
	2.000kΩ	±(0.8% reading + 2 digits)
	20.00kΩ
	200.0kΩ
	20.00MΩ	±(3.0% reading + 3 digits)
Temp °F	‐4 to 1400°F	‐4 to 59°F; ±(2.5% reading + 19 digits) 60 to 750°F ±(1.0% reading + 9 digits) 751; to 1400°F; ±(2.5% reading + 19 digits)
Temp °C	‐20 to 750°C	‐20 to 16°C; ±(2.5% reading + 10 digits) 17 to 400°C; ±(1.0% reading + 5 digits), 400 to 750°C; ±(2.5% reading + 10 digits) (probe accuracy not included)