Specialty Meters with IR

461880 Vibration Meter + Laser/Contact Tachometer by Extech

Features

• Unique large LCD with characters on display reverse direction depending on contact, photo, or vibration mode
• Windows® 95/98/NT/2000/XP compatible software (included) allows captured readings to be downloaded to your PC for further analysis
• Complete with remote vibration sensor, magnetic mount, wheels for linear surface speed or RPM (cone tip and flat tip), reflective tape, 4 AA batteries, software with cable, and hard carrying case
• Remote vibration sensor with magnetic adapter on 39"(1m) cable
• Wide frequency range of 10Hz to 1kHz
• RMS or Peak Value measurement modes
• Manual/Auto store/recall up to 1000 readings
• Data Hold freezes the reading in the display
• Auto shut-off saves battery life
• Uses a laser for greater distance non-contact measurements up to 4.9ft (1.5m)
• Stores last, max, and min readings

461880 Vibration Meter + Laser/Contact Tachometer with NIST by Extech

Features

• Unique large LCD with characters on display reverse direction depending on contact, photo, or vibration mode
• Windows® 95/98/NT/2000/XP compatible software (included) allows captured readings to be downloaded to your PC for further analysis
• Complete with remote vibration sensor, magnetic mount, wheels for linear surface speed or RPM (cone tip and flat tip), reflective tape, 4 AA batteries, software with cable, and hard carrying case
• Remote vibration sensor with magnetic adapter on 39"(1m) cable
• Wide frequency range of 10Hz to 1kHz
• RMS or Peak Value measurement modes
• Manual/Auto store/recall up to 1000 readings
• Data Hold freezes the reading in the display
• Auto shut-off saves battery life
• Uses a laser for greater distance non-contact measurements up to 4.9ft (1.5m)
• Stores last, max, and min readings

AN200 CFM/CMM Mini Thermo-Anemometer with built-in InfaRed Thermometer by Extech

Features

• Model AN100 - CFM/CMM Thermo-Anemometer
• Model AN200 - CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with an 8:1 distance-to-spot ratio and Laser Pointer
• Simultaneous display of Ambient Temperature and Air Flow or Air Velocity
• Up to 8 easy to set Area dimensions (ft 2 or cm2) are stored in the meter's internal memory
• 20 point average function for Air Flow
• Super large LCD Backlit Display
• 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
• Data Hold and MIN/MAX
• Auto Power off
• Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, protective rubber holster, and carrying case

Applications

• HVAC installation, repair, diagnostics, and optimization.
• Fume hood testing, installation, and verification
• Ventilation system installation, servicing, and analysis
• Environmental wind and temperature testing/analysis
• Boiler rooms
• Ionizer flow output monitoring
• Automobile aerodynamic testing
• Plant/Facilities Maintenance

AN200 CFM/CMM Mini Thermo-Anemometer with built-in InfaRed Thermometer, NIST by Extech

Features

• Model AN100 - CFM/CMM Thermo-Anemometer
• Model AN200 - CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with an 8:1 distance-to-spot ratio and Laser Pointer
• Simultaneous display of Ambient Temperature and Air Flow or Air Velocity
• Up to 8 easy to set Area dimensions (ft 2 or cm2) are stored in the meter's internal memory
• 20 point average function for Air Flow
• Super large LCD Backlit Display
• 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
• Data Hold and MIN/MAX
• Auto Power off
• Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, protective rubber holster, and carrying case

Applications

• HVAC installation, repair, diagnostics, and optimization.
• Fume hood testing, installation, and verification
• Ventilation system installation, servicing, and analysis
• Environmental wind and temperature testing/analysis
• Boiler rooms
• Ionizer flow output monitoring
• Automobile aerodynamic testing
• Plant/Facilities Maintenance

AN200 CFM/CMM Mini Thermo-Anemometer with built-in InfaRed Thermometer, Limited NIST by Extech

Features

• Model AN100 - CFM/CMM Thermo-Anemometer
• Model AN200 - CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with an 8:1 distance-to-spot ratio and Laser Pointer
• Simultaneous display of Ambient Temperature and Air Flow or Air Velocity
• Up to 8 easy to set Area dimensions (ft 2 or cm2) are stored in the meter's internal memory
• 20 point average function for Air Flow
• Super large LCD Backlit Display
• 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
• Data Hold and MIN/MAX
• Auto Power off
• Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, protective rubber holster, and carrying case

Applications

• HVAC installation, repair, diagnostics, and optimization.
• Fume hood testing, installation, and verification
• Ventilation system installation, servicing, and analysis
• Environmental wind and temperature testing/analysis
• Boiler rooms
• Ionizer flow output monitoring
• Automobile aerodynamic testing
• Plant/Facilities Maintenance

EX470 12 Function True RMS Professional MultiMeter + InfraRed Thermometer by Extech

Features

• Large backlit LCD display with easy-to-read 1" digits
• Type K thermometer built-in for temperature measurements
• Low current capability: measure down to 0.1?A
• Input fuse protection and mis-connection warnings
• Complete with CAT III test leads, multi-position tilt stand and velcro strap for hanging, protective holster with test lead holder, bead wire temperature probe, and 9V battery
• Built-in IR Thermometer
• True RMS
• Autoranging
• Capacitance
• Frequency
• Relative function

EX470 12 Function True RMS Professional MultiMeter + InfraRed Thermometer with Limited NIST by Extech

Features

• Large backlit LCD display with easy-to-read 1" digits
• Type K thermometer built-in for temperature measurements
• Low current capability: measure down to 0.1?A
• Input fuse protection and mis-connection warnings
• Complete with CAT III test leads, multi-position tilt stand and velcro strap for hanging, protective holster with test lead holder, bead wire temperature probe, and 9V battery
• Built-in IR Thermometer
• True RMS
• Autoranging
• Capacitance
• Frequency
• Relative function

EX570 12 Function True RMS Industrial MultiMeter with IR Thermometer by Extech

Features

• Patented built-in non-contact IR Thermometer design with laser pointer for locating hot spots
• True RMS CAT III-1000V, CAT IV-600V rated with 0.06% basic DCV accuracy
• Diode open circuit voltage of 2.8V DC
• Heavy duty Double molded, water resistant package
• Large backlit 40,000 count LCD with 40-segment bargraph
• Memory for storage and recall of three measurements
• 1000V input protection on all functions
• Type K thermocouple contact temperature measurements
• Features include HOLD, RELATIVE and PEAK HOLD
• Min, Max and Average recording
• Auto power off with disable feature
• Capacitance, Frequency, Diode and Continuity functions
• Complete with double molded test leads, magnetic hanging strap, general purpose Type K bead wire temperature probe, case, and 9V battery

EX570 12 Function True RMS Industrial MultiMeter with IR Thermometer with Limited NIST by Extech

Features

• Patented built-in non-contact IR Thermometer design with laser pointer for locating hot spots
• True RMS CAT III-1000V, CAT IV-600V rated with 0.06% basic DCV accuracy
• Diode open circuit voltage of 2.8V DC
• Heavy duty Double molded, water resistant package
• Large backlit 40,000 count LCD with 40-segment bargraph
• Memory for storage and recall of three measurements
• 1000V input protection on all functions
• Type K thermocouple contact temperature measurements
• Features include HOLD, RELATIVE and PEAK HOLD
• Min, Max and Average recording
• Auto power off with disable feature
• Capacitance, Frequency, Diode and Continuity functions
• Complete with double molded test leads, magnetic hanging strap, general purpose Type K bead wire temperature probe, case, and 9V battery

EX622 400A Dual Input AC Clamp Meter + NCV + IR Thermometer by Extech

Features

• True RMS measurements for accurate AC Voltage and Current measurements
• Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
• Built-in non-contact Voltage detector with LED alert
• DC µA multimeter function for HVAC flame rod Current measurements
• Data Hold plus fast Peak Hold of current surges during motor startup
• 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
• Measures motor capacitors to 40,000µF
• 1.25" (32mm) jaw opening for conductors up to 500MCM
• Rugged double molded housing
• Auto power off with audible alert and disable function
• Autoranging with manual override
• Complete with CAT III-600V, double molded test leads, 9V battery, two general purpose Type K bead wire probes and case
• Built-in non-contact IR Thermometer with laser pointer for locating hot spots
• 8 to 1 distance to target ratio

EX622 400A Dual Input AC Clamp Meter + NCV + IR Thermometer with Limited NIST by Extech

Features

• True RMS measurements for accurate AC Voltage and Current measurements
• Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
• Built-in non-contact Voltage detector with LED alert
• DC µA multimeter function for HVAC flame rod Current measurements
• Data Hold plus fast Peak Hold of current surges during motor startup
• 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
• Measures motor capacitors to 40,000µF
• 1.25" (32mm) jaw opening for conductors up to 500MCM
• Rugged double molded housing
• Auto power off with audible alert and disable function
• Autoranging with manual override
• Complete with CAT III-600V, double molded test leads, 9V battery, two general purpose Type K bead wire probes and case
• Built-in non-contact IR Thermometer with laser pointer for locating hot spots
• 8 to 1 distance to target ratio

EX623 400A Dual Input AC/DC Clamp Meter + NCV + IR Thermometer by Extech

Features

• True RMS measurements for accurate AC Voltage and Current measurements
• Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
• Built-in non-contact Voltage detector with LED alert
• DC µA multimeter function for HVAC flame rod Current measurements
• Data Hold plus fast Peak Hold of current surges during motor startup
• 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
• Measures motor capacitors to 40,000µF
• 1.25" (32mm) jaw opening for conductors up to 500MCM
• Rugged double molded housing
• Auto power off with audible alert and disable function
• Autoranging with manual override
• Complete with CAT III-600V, double molded test leads, 9V battery, two general purpose Type K bead wire probes and case
• Built-in non-contact IR Thermometer with laser pointer for locating hot spots
• 8 to 1 distance to target ratio

EX623 400A Dual Input AC/DC Clamp Meter + NCV + IR Thermometer with NISTL by Extech

Features

• True RMS measurements for accurate AC Voltage and Current measurements
• Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
• Built-in non-contact Voltage detector with LED alert
• DC µA multimeter function for HVAC flame rod Current measurements
• Data Hold plus fast Peak Hold of current surges during motor startup
• 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
• Measures motor capacitors to 40,000µF
• 1.25" (32mm) jaw opening for conductors up to 500MCM
• Rugged double molded housing
• Auto power off with audible alert and disable function
• Autoranging with manual override
• Complete with CAT III-600V, double molded test leads, 9V battery, two general purpose Type K bead wire probes and case
• Built-in non-contact IR Thermometer with laser pointer for locating hot spots
• 8 to 1 distance to target ratio

HD300 CFM/CMM Thermo-Anemometer with built-in InfaRed Thermometer by Extech

Features

• InfraRed Thermometer measures remote surface temperatures to 932°F (500°C) with 30:1 distance to spot ratio and Laser pointer
• Simultaneous display of Air Flow in CFM/CMM or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions are stored in the meters internal memory for the next power on
• Large (9999 count) LCD backlit display
• 20 point average for air flow
• USB port includes software
• Includes Windows® compatible software with cable, vane sensor with 3.9ft (120cm) cable, hard carrying case, and 9V battery

HD300 CFM/CMM Thermo-Anemometer with Built-in InfaRed Thermometer, NIST by Extech

Features

• InfraRed Thermometer measures remote surface temperatures to 932°F (500°C) with 30:1 distance to spot ratio and Laser pointer
• Simultaneous display of Air Flow in CFM/CMM or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions are stored in the meters internal memory for the next power on
• Large (9999 count) LCD backlit display
• 20 point average for air flow
• USB port includes software
• Includes Windows® compatible software with cable, vane sensor with 3.9ft (120cm) cable, hard carrying case, and 9V battery

HD300 CFM/CMM Thermo-Anemometer with Built-in InfaRed Thermometer, Limited NIST by Extech

Features

• InfraRed Thermometer measures remote surface temperatures to 932°F (500°C) with 30:1 distance to spot ratio and Laser pointer
• Simultaneous display of Air Flow in CFM/CMM or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions are stored in the meters internal memory for the next power on
• Large (9999 count) LCD backlit display
• 20 point average for air flow
• USB port includes software
• Includes Windows® compatible software with cable, vane sensor with 3.9ft (120cm) cable, hard carrying case, and 9V battery

HD500 Psychrometer with InfraRed Thermometer by Extech

Features

• Built-in InfraRed Thermometer for non-contact temperature measurement to 932°F (500°C) with 30:1 distance to target ratio
• Type K Temperature function for contact temperature measurement to 2501°F (1372°C)
• Highest 2% RH accuracy
• Heavy Duty rugged double molded housing with large triple LCD backlit display
• Auto power off
• USB port includes PC software
• Includes Windows® compatible software with USB cable, Type K bead wire temperature probe, built-in stand, hard carrying case, and 9V battery

HD500 Psychrometer with InfraRed Thermometer with NIST by Extech

Features

• Built-in InfraRed Thermometer for non-contact temperature measurement to 932°F (500°C) with 30:1 distance to target ratio
• Type K Temperature function for contact temperature measurement to 2501°F (1372°C)
• Highest 2% RH accuracy
• Heavy Duty rugged double molded housing with large triple LCD backlit display
• Auto power off
• USB port includes PC software
• Includes Windows® compatible software with USB cable, Type K bead wire temperature probe, built-in stand, hard carrying case, and 9V battery

HD500 Psychrometer with InfraRed Thermometer with Limited NIST by Extech

Features

• Built-in InfraRed Thermometer for non-contact temperature measurement to 932°F (500°C) with 30:1 distance to target ratio
• Type K Temperature function for contact temperature measurement to 2501°F (1372°C)
• Highest 2% RH accuracy
• Heavy Duty rugged double molded housing with large triple LCD backlit display
• Auto power off
• USB port includes PC software
• Includes Windows® compatible software with USB cable, Type K bead wire temperature probe, built-in stand, hard carrying case, and 9V battery

MO290 Pinless Moisture Psychrometer + IR by Extech

Features

• Quickly indicates the moisture content of materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
• Works on multiple wood types and other building materials
• Easy to read, large dual display with automatic backlight feature
• Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm) below the surface
• Programmable high/low Moisture and Humidity alarms Designed with an IR circuit to measure non-contact surface temperature; 8:1 distance to spot ratio with 0.95 fixed emissivity
• Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point
• Automatic calculation of differential Temperature (IR - DP) to determine condensation point
• Min/Max and Data Hold
• Auto power off and low battery indication
• Complete with pin moisture probe with cable, 9V battery and case

MO290 Pinless Moisture Psychrometer + IR with Limited NIST by Extech

Features

• Quickly indicates the moisture content of materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
• Works on multiple wood types and other building materials
• Easy to read, large dual display with automatic backlight feature
• Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm) below the surface
• Programmable high/low Moisture and Humidity alarms Designed with an IR circuit to measure non-contact surface temperature; 8:1 distance to spot ratio with 0.95 fixed emissivity
• Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point
• Automatic calculation of differential Temperature (IR - DP) to determine condensation point
• Min/Max and Data Hold
• Auto power off and low battery indication
• Complete with pin moisture probe with cable, 9V battery and case

MO295 Pinless Moisture Psychrometer + IR Thermometer by Extech

Features

• Quickly indicates the moisture content of materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO-P1 included) allows for contact moisture readings (3ft/0.9m cable length)
• Manually store/recall up to 20 labeled readings
• Works on multiple wood types and other building materials
• Easy to read, large dual display with automatic backlight feature
• Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm) below the surface
• Programmable high/low Moisture and Humidity alarms
• Designed with an IR circuit to measure non-contact surface temperature; 8:1 distance to spot ratio with 0.95 fixed emissivity
• Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point
• Automatic calculation of differential Temperature (IR - DP) to determine condensation point
• Fast Analog Bargraph
• Min/Max and Data Hold
• Auto power off and low battery indication
• Complete with pin moisture probe with cable, 9V battery and case

MO295 Pinless Moisture Psychrometer + IR Thermometer with Limited NIST by Extech

Features

• Quickly indicates the moisture content of materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO-P1 included) allows for contact moisture readings (3ft/0.9m cable length)
• Manually store/recall up to 20 labeled readings
• Works on multiple wood types and other building materials
• Easy to read, large dual display with automatic backlight feature
• Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm) below the surface
• Programmable high/low Moisture and Humidity alarms
• Designed with an IR circuit to measure non-contact surface temperature; 8:1 distance to spot ratio with 0.95 fixed emissivity
• Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point
• Automatic calculation of differential Temperature (IR - DP) to determine condensation point
• Fast Analog Bargraph
• Min/Max and Data Hold
• Auto power off and low battery indication
• Complete with pin moisture probe with cable, 9V battery and case

MO297 Pinless Moisture Psychrometer with IR Thermometer and Bluetooth MeterLink™ by Extech

Features

• Quickly indicates the moisture content of multiple wood types and other building materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
• Wireless communication with FLIR Thermal Imaging Cameras (b60, i60, B-Series, and T-Series)
• Manually store/recall up to 20 labeled readings
• Easy to read, large dual display with automatic backlight feature and Fast Analog Bargraph
• Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm) below the surface
• Programmable high/low Moisture/Humidity alarms
• Designed with an IR circuit to measure non-contact surface temperature
• Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point
• Automatic calculation of differential Temperature (IR - DP) to determine condensation point
• Min/Max, Data Hold, and Auto power off
• Complete with pin moisture probe with cable, 9V battery and pouch case

MO297 Pinless Moisture Psychrometer with IR Thermometer and Bluetooth MeterLink™ with Limited NIST by Extech

Features

• Quickly indicates the moisture content of multiple wood types and other building materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
• Wireless communication with FLIR Thermal Imaging Cameras (b60, i60, B-Series, and T-Series)
• Manually store/recall up to 20 labeled readings
• Easy to read, large dual display with automatic backlight feature and Fast Analog Bargraph
• Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm) below the surface
• Programmable high/low Moisture/Humidity alarms
• Designed with an IR circuit to measure non-contact surface temperature
• Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point
• Automatic calculation of differential Temperature (IR - DP) to determine condensation point
• Min/Max, Data Hold, and Auto power off
• Complete with pin moisture probe with cable, 9V battery and pouch case

RH101 Hygro-Thermometer + InfraRed Thermometer by Extech

Features

• Combination Humidity meter plus InfraRed Thermometer features a super large backlit dual display
• Primary and Secondary displays - Primary display is user selectable for IR or Humidity; Secondary always displays ambient temperature
• InfraRed thermometer has built in laser pointer and has an 8:1 distance to target ratio
• MAX and Data Hold for all functions
• Remote humidity sensor with 39" (1m) coiled cable provides readings for both humidity and ambient temperature
• Switchable °C/°F temperature units
• Auto Power off to save battery life
• Low battery and overrange indication
• Complete with built-in stand, protective holster, Humidity/Temperature probe, 9V battery, and carrying case

Applications

• Monitor Relative Humidity and Temperature in factories, clean rooms, offices, and greenhouses
• Non-contact InfraRed surface temperature measurements in hard to reach areas such as heating and air conditioning ducts

RH401 Digital Psychrometer + InfraRed Thermometer by Extech

Features

• Triple display with backlighting: View Air temp+RH+surface temp; View Dew Point+RH+surface temp; View Wet Bulb+RH+surface temp
• InfraRed Thermometer with Built-in laser pointer, 8:1 distance to target ratio, Adjustable Emissivity from 0.3 to 1.0
• Precision humidity capacitance sensor is retractable for protection during transportation and storage
• Calculates T1 (IR Surface Temperature) - DP (Dew Point) differential
• Programmable Auto power off and Low battery indication
• Over-range/under-range alert indicator
• Built-in RS-232 interface for capturing readings on a PC
• RH401 complete with 4 AAA batteries and carrying case
• Optional RH405 kit includes meter, 33% and 75% calibration bottles, RS-232 cable, 4 AAA batteries and carrying case

Applications

• Monitor Wet Bulb, Dew Point, Relative Humidity and Temperature in factories, clean rooms, offices, and greenhouses
• Non-contact InfraRed surface temperature measurements in hard to reach areas such as heating and air conditioning duct
• Humdity monitoring in schools, offices and manufacturing or storage areas

RPM10 Photo/Contact Tachometer with built-in InfraRed Thermometer by Extech

Features

• Built-in IR thermometer with laser measures remote surface temperature on motors and rotating parts
• Wide Temperature range of -4 to 600°F (-20 to 315°C)
• Fixed 0.95 emissivity, 6:1 distance to target ratio
• Provides wide RPM (photo and contact) and Linear Surface Speed (contact) measurements
• Accurate to 0.05% with max resolution of 0.1rpm in either photo or contact mode
• Large 0.4" (5 digit) LCD display
• Non-contact Photo tachometer uses a Laser for greater measuring distance up to 6.5ft (2m)
• Contact tachometer for RPM and surface speed measurements
• Memory stores Min/Max/Last
• Characters on display reverse direction depending on mode
• Double molded housing
• Complete with tips/wheel, four 1.5V AA batteries, reflective tape, and carrying case

RPM10 Photo/Contact Tachometer with built-in InfraRed Thermometer and NIST by Extech

Features

• Built-in IR thermometer with laser measures remote surface temperature on motors and rotating parts
• Wide Temperature range of -4 to 600°F (-20 to 315°C)
• Fixed 0.95 emissivity, 6:1 distance to target ratio
• Provides wide RPM (photo and contact) and Linear Surface Speed (contact) measurements
• Accurate to 0.05% with max resolution of 0.1rpm in either photo or contact mode
• Large 0.4" (5 digit) LCD display
• Non-contact Photo tachometer uses a Laser for greater measuring distance up to 6.5ft (2m)
• Contact tachometer for RPM and surface speed measurements
• Memory stores Min/Max/Last
• Characters on display reverse direction depending on mode
• Double molded housing
• Complete with tips/wheel, four 1.5V AA batteries, reflective tape, and carrying case

RPM10 Photo/Contact Tachometer with built-in InfraRed Thermometer and Limited NIST by Extech

Features

• Built-in IR thermometer with laser measures remote surface temperature on motors and rotating parts
• Wide Temperature range of -4 to 600°F (-20 to 315°C)
• Fixed 0.95 emissivity, 6:1 distance to target ratio
• Provides wide RPM (photo and contact) and Linear Surface Speed (contact) measurements
• Accurate to 0.05% with max resolution of 0.1rpm in either photo or contact mode
• Large 0.4" (5 digit) LCD display
• Non-contact Photo tachometer uses a Laser for greater measuring distance up to 6.5ft (2m)
• Contact tachometer for RPM and surface speed measurements
• Memory stores Min/Max/Last
• Characters on display reverse direction depending on mode
• Double molded housing
• Complete with tips/wheel, four 1.5V AA batteries, reflective tape, and carrying case

EX810 1000A AC Clamp Meter with IR Thermometer by Extech

Ideal for industrial applications the 800 series Full size 1000A clamps feature a built-in Infared thermometer and rugged double molded housing

Features

• Non-contact InfraRed Temperature measurements with laser pointer
• Models with True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Type K Temperature (EX820/EX830), Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max
• Autoranging with manual range button
• Auto Power off
• Complete with test leads, 9V battery, general purpose Type K probe (EX820/EX830), and case
• AC Current
• Average responding

EX810 1000A AC Clamp Meter with IR Thermometer with Limited NIST by Extech

Ideal for industrial applications the 800 series Full size 1000A clamps feature a built-in Infared thermometer and rugged double molded housing

Features

• Non-contact InfraRed Temperature measurements with laser pointer
• Models with True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Type K Temperature (EX820/EX830), Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max
• Autoranging with manual range button
• Auto Power off
• Complete with test leads, 9V battery, general purpose Type K probe (EX820/EX830), and case
• AC Current
• Average responding

EX820 1000A True RMS AC Clamp Meter with IR Thermometer by Extech

Ideal for industrial applications the 800 series Full size 1000A clamps feature a built-in Infared thermometer and rugged double molded housing

Features

• Non-contact InfraRed Temperature measurements with laser pointer
• Models with True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Type K Temperature (EX820/EX830), Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max
• Autoranging with manual range button
• Auto Power off
• Complete with test leads, 9V battery, general purpose Type K probe (EX820/EX830), and case
• AC Current
• True RMS
• Type K thermometer

EX820 1000A True RMS AC Clamp Meter with IR Thermometer with Limited NIST by Extech

Ideal for industrial applications the 800 series Full size 1000A clamps feature a built-in Infared thermometer and rugged double molded housing

Features

• Non-contact InfraRed Temperature measurements with laser pointer
• Models with True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Type K Temperature (EX820/EX830), Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max
• Autoranging with manual range button
• Auto Power off
• Complete with test leads, 9V battery, general purpose Type K probe (EX820/EX830), and case
• AC Current
• True RMS
• Type K thermometer

EX830 1000A True RMS AC/DC Clamp Meter with IR Thermometer by Extech

Ideal for industrial applications the 800 series Full size 1000A clamps feature a built-in Infared thermometer and rugged double molded housing

Features

• Non-contact InfraRed Temperature measurements with laser pointer
• Models with True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Type K Temperature (EX820/EX830), Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max
• Autoranging with manual range button
• Auto Power off
• Complete with test leads, 9V battery, general purpose Type K probe (EX820/EX830), and case
• DC/ AC Current
• True RMS
• Type K thermometer
• DC Zero

EX830 1000A True RMS AC/DC Clamp Meter with IR Thermometer with NISTL by Extech

Ideal for industrial applications the 800 series Full size 1000A clamps feature a built-in Infared thermometer and rugged double molded housing

Features

• Non-contact InfraRed Temperature measurements with laser pointer
• Models with True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Type K Temperature (EX820/EX830), Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max
• Autoranging with manual range button
• Auto Power off
• Complete with test leads, 9V battery, general purpose Type K probe (EX820/EX830), and case
• DC/ AC Current
• True RMS
• Type K thermometer
• DC Zero

EX840 1000A AC/DC True RMS Clamp/DMM + IR Thermometer by Extech

Ideal for industrial applications, this full-size True RMS 1000A AC/DC Clamp features a built-in Infared Thermometer and rugged double molded housing.

Features

• Built-in non-contact IR Thermometer with laser pointer
• True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max and Auto Power off
• Autoranging with manual range button
• Complete with CAT IV test leads, 9V battery, general purpose Type K probe, pouch case, and Professional Test Lead Set

Professional Test Lead Features

• 8-Piece Professional Test Lead set
• Two 42" (1m) PVC lead extensions with shrouded banana plugs at both ends
• Two modular 4" (102mm) Heavy Duty test probe handles with 0.16" (4mm) banana plug tip
• Two standard size, alligator clips with insulated rubber boot
• Two extra large, double-insulated, alligator clips with sharp teeth for piercing insulated wire. Jaws open to 0.8" (20mm)

Includes

• Pouch case to store the meter
• Temperature probe
• Test leads

EX840 1000A AC/DC True RMS Clamp/DMM + IR Thermometer with NISTL by Extech

Ideal for industrial applications, this full-size True RMS 1000A AC/DC Clamp features a built-in Infared Thermometer and rugged double molded housing.

Features

• Built-in non-contact IR Thermometer with laser pointer
• True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max and Auto Power off
• Autoranging with manual range button
• Complete with CAT IV test leads, 9V battery, general purpose Type K probe, pouch case, and Professional Test Lead Set

Professional Test Lead Features

• 8-Piece Professional Test Lead set
• Two 42" (1m) PVC lead extensions with shrouded banana plugs at both ends
• Two modular 4" (102mm) Heavy Duty test probe handles with 0.16" (4mm) banana plug tip
• Two standard size, alligator clips with insulated rubber boot
• Two extra large, double-insulated, alligator clips with sharp teeth for piercing insulated wire. Jaws open to 0.8" (20mm)

Includes

• Pouch case to store the meter
• Temperature probe
• Test leads

EX845 1000A AC/DC True RMS Clamp/DMM with IR Thermometer and Bluetooth MeterLink™ by Extech

Compact size allows measurements in tight locations and Built-in non-contact Voltage detector with LED alert. Three models to choose from with True RMS option and advanced multimeter functions.

Features

• Built-in non-contact IR Thermometer design with laser pointer
• METERLiNK Wireless communication with FLIR Thermal Imaging Cameras (b60, i60, B-Series, and T-Series)
• CAT IV safety rating for industrial applications
• True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button
• Data Hold, Min/Max and Auto Power off
• Complete with CAT IV test leads, 9V battery, general purpose Type K probe, pouch case, and Professional Test Lead Set